Is It Safe For My HVAC To Use Both Heat And A/C In One Day?

Good Deals Heating and Cooling HVAC

This year isn’t the first year that spring seems to be confused. One day the weather will be winter chilly, and the next day the weather will be hot. With this influx of outdoor weather keeping your home at a comfortable temperature becomes a challenge. Some people think that it isn’t safe to run the HVAC in both heat and air conditioning modes on the same day.
Is this true? Will I kill my HVAC system?

Will It Kill My HVAC System?

The plain and simple answer is that running both the air conditioner function and heat function of your HVAC system in one day won’t kill it.

Your HVAC system is designed to keep your home at the desired temperature, whether that means heating or cooling. If you couldn’t run both on the same day, then the system wouldn’t be able to do its job. Frequently switching between the two won’t hurt.

One important note to keep in mind is that you need to let the HVAC system finish its session before switching. The compressor needs to come to a complete stop and shut off before you adjust the temperature.

Pay Attention For Signs Your HVAC System May Have Problems

Instead of worrying whether or not to run your HVAC system on both heating and cooling in the same day, you should focus on signs that your HVAC system may be having problems. Here are several symptoms that the HVAC system may be having issues:

  • A circuit breaker keeps tripping when HVAC turns on
  • The unit is continuously running with no pause or shut off
  • Failure of the system to meet the set temperature
  • The air coming out of the vents has an odor
  • An noticeable increase of contaminants (i.e., dust) in the home
  • The unit stops turning on when it usually would

Schedule Regular Maintenance

An HVAC system is designed to have regular maintenance. For most units that means at least once a year. By staying on top of routine maintenance allows the HVAC system to run at peak performance. It will also help to prevent unit failure by catching and repairing small problems.

Heating, Ventilation, and Air Conditioning units are designed to help control the climate in your home. Because these units are designed to operate in both the summer and winter, they are very flexible. You don’t have to worry about switching between the heating and air conditioning. What you do need to worry about is keeping your system in good working order to ensure that it is ready to go when you need it.

To schedule a routine maintenance service call for your HVAC system, contact Good Deals Heating and Cooling at 215-947-1166.

Spring Maintenance Checklist

Good Deals Heating and Cooling home maintenance tipsWhen it comes to Spring, most people can’t help but do a little bit of cleaning.  Many folks just clean in a haphazard fashion – a little here, a little there.  Making a checklist of chores to be completed will keep one focused on what needs to get done.  Here are a few items to add to that list.

Test the AC Unit

It is spring, and warm weather is just around the corner.   Check to make sure the air conditioning unit is working and if it isn’t, get it repaired now before the hot temperatures of summer arrive.   In Fall, repeat the same routine for the heating system.

Check Air Filters

The HVAC system uses a filter to remove dust and other particles from the circulating air in the house.  Check this filter and replace it once a month when using the system regularly.  It is important to note that some filters can be washed/wiped and reused.

Clean the AC Drainage Hole

Almost all residential air conditioners have a little drainage hole on the bottom of the unit.  It can be found by looking for the evaporator fins.  For the unit to maintain proper function, it is important for this hole to remain clear.  Spring is a good time to take a wire, paper clip, or similar object and poke it through to ensure the water flows freely.

Clean the Dehumidifier

The dehumidifier needs to be cleaned and dried at least once a year to function at its optimum level.  To do this, remove the housing on the unit.  Allow the unit a bit of time to dry.  Once dry vacuum every accessible piece and wipe it down with a lint-free cloth.  Make sure to be gentle when doing both!

Prevent Rust on Faucet Handles

Faucet handles get wet.  That doesn’t mean they have to get rusty.  Removing the handle once a year and wiping it down will prevent rust.  If signs that rust has started to form, use a rust remover to ensure that the faucet handles will continue to operate optimally.

Battery Replacement

Most fire/life safety devices, as well as many security devices, use batteries to work.  Spring is the perfect time to replace those batteries.  Check carbon monoxide detectors, smoke detectors, cameras, and motion sensors.

Check Window and Door Seals

It isn’t uncommon for window and door seals to deteriorate, especially those that are frequently used.  Take a minute to walk around your house and check all of the seals.  This inspection will help to ensure and maintain the proper temperature in the home.

For more information or to schedule a professional check-up, contact Good Deals Heating and Cooling at 215-947-1166.